+617 54564110 wecare@magicezy.com

Do-It-Yourself Fiberglass Boat Repair

Do you have chips, cracks, and scratches on your fiberglass boat? Have you been putting off the fiberglass boat repair due to time and effort involved or the cost of hiring a professional?

Fiberglass boat repair can be expensive and may take time. But you cannot keep putting off the repair. In the long run, the chip or crack will spread and the damage will get worse. 

But you don’t need to go to a fiberglasser and wait for your boat to be fixed. There is an easy way to repair small chips on your boat that you can do yourself.

Introducing the new MagicEzy 9 Second Chip Fix, a revolutionary nanofiller that fills in colors in gelcoat, fiberglass, ceramics, and stone in seconds. It comes in 11 popular boat colors. It is easy to apply with no tools required. And there is no mixing of nasty chemicals. It has a strong adhesion so you are assured that the repair will last long.

To repair small chips or cracks using the MagicEzy 9 Second Chip Fix, simply follow these easy steps for a repair that will have your boat looking great in no time. 


Step-by-step process in doing fiberglass boat repair

Before you start, clean the area with water down dishwashing liquid solution. Then rinse thoroughly with water and allow to dry. 


Step 1

Squirt a quarter-inch or 6 mm layer of MagicEzy 9 Second Chip Fix into the damage.


Step 2 

Turn the tube around and gently smooth with the specially designed level. Unlike other fillers, only a tiny amount of pressure is required when levelling.


Step 3

Immediately, clean the level with a tissue and level away the smears.    

And just like that, in a matter of seconds, the repair is done. It is so easy even you can do it. 

To get your tube of MagicEzy 9 Second Chip Fix order on Amazon today.